Latest Firmware for LUBA 1: V1.10.5.246
- Supported the same cutting direction for all selected zones by setting absolute angle.
- Supported the shortcut to start a task
Latest Firmware for LUBA 2:V1.11.511.411
Added the lawn printing art feature.
Added the task area naming feature.
Added the task schedule naming feature.
Added the non-working periods feature.
Optimized 4G connection stability.
Optimized the performance of mowing on a large map.
Optimized the efficiency of crossing two overlapped zones near the perimeter
Decreased the volume of the buzzer.
Decreased the possibilities of tank turning in multi-point turn mode.
Fixed the issue of some batteries draining too fast occasionally.
Fixed the 1553 error in certain scenarios
Latest Firmware for YUKA as well as its RTK
YUKA: V1.11.720.414
Added the lawn printing art feature.
Added the task area naming feature.
Added the task schedule naming feature.
Added the non-working periods feature.
Added mowing and sweeping data in the task report.
Adjusted path spacing range to 15-30 cm.
Supported the same cutting direction for all selected zones by setting absolute angle.
Optimized the performance of mowing on a large map.
Optimized the efficiency of crossing two overlapped zones near the perimeter.
Optimized 4G connection stability.
Fixed the issue where the cutting disks would rotate in the same direction.
Decreased the volume of buzzer.
RTK:V1.11.2.712
Optimized the LoRa transceiver duty cycle.
Optimized the stability of RTK reference station IoT connection with the app via Wi-Fi.
Latest iOS App: v1.11.213
-[Luba 2/Yuka] Added lawn printing art function
-[Luba/Luba 2/Yuka] Added quick start function
-[Luba 2/Yuka] Supported portrait mode of positioning and orientation guidance
-[Luba 2/Yuka] Added the non-working periods feature
-[Luba 2/Yuka] Added task area rename function
-[Luba 2/Yuka] Added task schedule rename function
-[Luba/Luba 2/Yuka] Added quick search of Bluetooth to bind devices
-[Luba/Luba 2/Yuka] Added the guidance that the robot cannot reach area in task assignment and when the channel is deleted
-[Luba/Luba 2/Yuka] Added the guidance for clearing obstacles before operation
iOS Enhancements：
-[Luba 2/Yuka] Fixed the issue where the Crossing angle could not be changed.
-[Luba/Luba 2/Yuka] Fixed the issue that the preview showed Zigzag path mode when setting the Chessboard path mode.