To make the robot work well, please keep the robot and RTK station updated with the latest firmware.
Please check the following tips if the problem stays the same with the latest firmware.
- Make sure your pairing code is correct. It would be better if you could provide a photo of the label on RTK.
- Make sure Luba and RTK are in the same work mode. There are two modes in the latest firmware: Internet and Lora. The robot can work well when the robot and RTK station under the same mode. (RTK will show solid blue light under the Internet mode, and solid green light under Lora mode)
You can follow the images below to check the mode settings.