AI Vioce Control-To Link Your Alexa Account
NOTE
● Prior to starting a job using voice control, it is necessary to have created at least one task beforehand.
● In cases where more than 2 sets of robot are linked to the same Mammotion account, the voice command will be directed to the most recently bound robot by default.
1. Go to the Me page and tap on Alexa.
2. Select YUKA to proceed.
3. Tap Link Alexa to go to the authorization page.
4. Finally, tap Link to complete the operation.
Once the linking is successful, you can control YUKA with voice commands. Here are some examples for starting, pausing, stopping, recharging, and checking the status:
| Working -Alexa, ask YUKA to start working -Alexa, ask YUKA to start task xx (xx means the name of the task you set) |
| Pause working -Alexa, ask YUKA to pause -Alexa, ask YUKA to hold on -Alexa, ask YUKA to suspend |
| Continue working -Alexa, ask YUKA to continue -Alexa, ask YUKA to resume |
| Stop working -Alexa, ask YUKA to stop working -Alexa, ask YUKA to end the task |
| Recharge -Alexa, ask YUKA to recharge -Alexa, ask YUKA to go home |
| Check status -Alexa, ask YUKA status -Alexa, ask YUKA what it is doing |
Related Articles
AI Vioce Control-To Link Your Google Home Account
NOTE Prior to starting a job using voice control, it is necessary to have created at least one task beforehand. The robot now supports voice commands in English, German, and French. 1. Go to the Me page and tap on Google Home. 2. Tap Link Google Home ...How to Create Channel
The channel is intended to connect various task areas or link the task area with the charging station. 1. Tap Create > Channel on the map page. 2. Control the robot into a task area. Tap to start mapping. 3. Manually control the robot from a task ...Share Your Device
To Share Your Device Sharing your device allows the recipient to control and access device information, but they cannot share it further or use its anti-theft feature. 1. Go to the Me page and tap Device management and sharing. 2. Select your own ...Switch Positioning Mode
RTK Link Mode refers to the method of connection between an RTK reference station and a robot. We will introduce two modes in this page: Antenna over Datalink and Antenna over Internet. Antenna over Internet Antenna over Internet utilizes the ...How to Create No-go Zone
No-go zones are created for pools, flowerbeds, trees, roots, ditches, and any other obstructions present in the lawn. The robot will avoid mowing inside these designated areas. 1. Tap Create > No-go zone on the Map page. 2. Guide the robot to the ...