How to Create Channel
The channel is intended to connect various task areas or link the task area with the charging station.
1. Tap Create > Channel on the map page.
2. Control the robot into a task area. Tap 
to start mapping.
3. Manually control the robot from a task area to another task area or to the charging station.
NOTE: The channel should be wider than 1 m (3.3 feet). The channel should be free from significant bumps.4. Tap Save to finish the setting.
Related Articles
How to Create Pattern
The pattern is designed to personalize your lawn-cutting experience, and after it's added, the grass on the patterned area will be preserved while cutting to maintain its design. See the available patterns in the app. 1. Tap Create > Pattern on the ...How to Create No-go Zone
No-go zones are created for pools, flowerbeds, trees, roots, ditches, and any other obstructions present in the lawn. The robot will avoid mowing inside these designated areas. 1. Tap Create > No-go zone on the Map page. 2. Guide the robot to the ...Map your Lawn and Create Task Area
Before Mapping-Preparation Before mapping, it is important to be aware of key considerations. Remove debris, piles of leaves, toys, wires, stones, and other obstacles from the lawn. Make sure no children or animals are on the lawn. Map Your Lawn 1. ...How to Install Charging Station for YUKA mini
Choosing a Location Ensure the charging station is installed in an open area, free of bumps, or obstacles. Place the charging station on a flat ground. The charging area (1x1 m/3x3 feet in front of the charging station) should be free from ...How to Set Mowing Task
Preparation If any unexpected problems arise, please press the STOP button and secure the robot. The STOP button holds top priority among all commands. If the lift sensor is activated, the robot will come to a halt. Please press the Grass button ...