Ensure the charging station is installed in an open area, free of bumps, or obstacles.

1. Place the charging station on a flat ground.
   
2. The charging area (1x1 m/3x3 feet in front of the charging station) should be free from significant  bumps. The slope must be less than 5ﾟ.
3. DO NOT install the charging station at the corner of an L-shaped building or on a narrow path between two structures.
   
4. No obstacles or other items should be between the charging station and the docking point.
   
5. The base plate of the charging station must remain flat and not be bent or tilted.
   

DO NOT install in a place where there's thick grass.

Position the charging station to face the lawn. 

If the charging station is placed outside the lawn, create a channel to connect it to the lawn.

NOTE

If the charging station is installed on a concrete surface, please secure it with expansion bolts.

Install the Charging Station

1. Insert the charging tower into the charging base plate until you hear a CLICK sound.

2. Install and tighten the four screws from the bottom of the charging base plate using the screwdriver with the T20 bit.

3. Select an open spot to install the charging station. Use the four stakes to properly fasten the charging station in the position as shown.

4. Connect the charging station cable (the longer one) with the power supply. 

5. Use the cable peg to fix the cable on the ground. 

6. Plug the charging station power supply into the wall socket.

NOTE

Charge the robot for initial use to activate it.