Unlock Robot

If your robot is locked, use the following methods to unlock it:

● Press the Grass button on the robot and press the START button to continue the work/unlock.

● Press the Auto-return button on the robot and press the START button to return to the charging station.

*The illustrations use YUKA as an example. Please refer to your actual robot for specifics.

• Related Articles

• Map your Lawn and Create Task Area

  Before Mapping-Preparation Before mapping, it is important to be aware of key considerations. Remove debris, piles of leaves, toys, wires, stones, and other obstacles from the lawn. Make sure no children or animals are on the lawn. Map Your Lawn 1. ...

• How to Recharge

  NOTE When performing recharge function, the robot must be in the task area. To Perform Recharge ➢ Tap on the Map page in the Mammotion app, or ➢ Press the button on the robot, then press START to guide it to the charging station. There are two ...

• Battery Maintenance

  Ensure that the battery is charged to a minimum state of charge (SOC) of 80% prior to long-term storage to prevent over-discharge. During periods of inactivity, recharge the battery to 80% or higher at intervals not exceeding 90 days. Ensure the ...

• Winter Storage

  To ensure your robot is in optimal condition for the next mowing season, store the robot, charging station, and RTK reference station properly. Store Robot Control the robot off the charging station, make sure it is charged to at least 80%. Power off ...

• Task Settings

  Frequency You can set the working frequency here. Now — The robot will commence work promptly upon configuration. Weekly — The robot will repeat the task every week based on your preferences. Cutting path angle (°) Optimal：Take the most efficient ...