Weekly Maintenance for Optimal Performance
To maintain optimal mowing performance and extend the lifespan of your robot, Mammotion advises performing regular inspections and maintenance weekly. For safety and effectiveness, always wear protective clothing such as trousers and work shoes; avoid wearing open sandals or going barefoot during maintenance.
Please refer to our Cleaning, Maintenance for Cutting Blades and Motor, Battery Maintenance, and Winter Storage sections for more detailed maintenance guidelines.
Related Articles
Maintenance for Cutting Blades and Motor
WARNING Always wear protective gloves when inspecting, cleaning, or replacing the cutting blade. DO NOT use an electrical screwdriver to tighten or loosen the cutting disc. Always use the correct screws and original blades approved by Mammotion. ...
Battery Maintenance
Maintain the battery fully charged before long-term storage to prevent over-discharge. Charge fully every 90 days, even if it is not in use. Ensure the charging ports on the robot are clean and dry before storing or charging.
Task Settings
Frequency You can set the working frequency here. Now — The robot will commence work promptly upon configuration. Weekly — The robot will repeat the task every week based on your preferences. Cutting path angle (°) Optimal：Take the most efficient ...
How to Set Mowing Task
Preparation If any unexpected problems arise, please press the STOP button and secure the robot. The STOP button holds top priority among all commands. If the lift sensor is activated, the robot will come to a halt. Please press the Grass button ...
How to Install RTK Reference Station
Choose a Location To optimize the performance of the RTK system, the RTK reference station must be in an open area to receive satellite signals. You can install the RTK reference station on flat, open ground or on an unobstructed wall or roof. In ...