The problem could be the Luba or the App when you encounter such an issue. Please try the following steps first. 1. Power off Luba, unplug the Key and plug it back in, then power on Luba. 2. Restart the App and try again. Please refer to the ...
Possible reasons: Luba can not get enough good signal at the current position RTK reference station can not get enough good signal at the current position What to do: 1. Check if the RTK reference station is installed in an open-sky view position, ...
Scenarios that need both Bluetooth&WiFI connections. Initial setup for Luba Submit a Log-feedback from the App Update firmware Scenarios that need Bluetooth connection, WiFi connection is not necessary Create/Edit the boundary of the map Create No-go ...
You'll need to delete the current map and recreate it if you move the RTk reference station to anotherposition. The whole map is created based on the realposition of the RTK reference station. The logisticposition of the map will be offset after ...
The following are the possible reasons why you can not turn on Luba. The battery runs out of power The controller is stuck Please try the following tips if you encounter such an issue. 1. Put Luba into the Charging Station and check if Luba will be ...
NEW positioning information under POS on the App. Explanation of the NEW positioning information. Positioning status： Fix: Fine positioning status, accuracy less than 10cm, up to 2cm with the good open-sky area; (can auto mowing) Float: Bad ...
Luba only supports the 2.4GHz WiFi connection. Please check if the connection is in 2.4GHz or if it provides both the 2.4GHz and 5GHz connections. You may control Luba to move to near the router for firmware-updating purposes. Such an issue may also ...
The problem could be the Luba or the App when you encounter such an issue. Please try the following steps first. 1. Power off Luba, unplug the Key and plug it back in, then power on Luba. 2. Restart the App and try again. Please refer to the ...